Do you always dream of designing & building complex robots and projects, here is a chance where you can make all your innovative ideas come to life, ARESP is a one of its kind of a project-based learning program to make you the masters in the field of embedded system design, either you want to learn to build robots and circuit designing just to amaze your friends , or get a job and make a career in Embedded systems, ARESP program will provide you the complete technical skill and knowledge required to master the Embedded system designing. Starting from very scratch with no knowledge whats so ever in embedded system & Robotics to becoming a master in designing Complicated circuits and Robots Right from basics of wires & batteries to Advanced concepts like fingerprint recognition , wireless transmission , touchscreen you will master it all. The program is specifically designed for students passionate in the field of electronics & computer science to give them practical understanding of the subject and help them apply the knowledge to build practical projects.

The output of any learning program should be to apply all the knowledge and skills in real life problem solving rather than just getting good grades in test and exams. ARESP is complete Project based learning program in which students are trained by making real world practical projects. In this program Students explore real world problems and challenges and use their skill & knowledge in electronics & Programming to build a solution ,simultaneously developing advanced skills while working in small collaborative groups. ARESP being a complete project based learning program , students are constantly involved in groups building prototypes and writing programs which inspires students to obtain a deeper knowledge of the subjects they're studying. As students are trained to practical project based approach more likely to retain the knowledge gained through this approach far more readily than through traditional textbook-centered learning.

ARESP SYLLABUS


ARESP : Setting up Hardware & Development Board!!

  • Introduction to various MCU hardware & Development Motherboard
  • Exploring different MCU & Hardware available in market
  • Learn to select right Microcontroller & Hardware for your projects
  • Learn to select right Development Motherboard for selected Microcontroller
  • Cost vs Features analysing for Hardware selection
  • Learn & understand features avilable in Microcontroller
  • Learn and understand options & Features available in Developent Motherboard
  • Selection of right batteries & power supply for MCU
  • Get to know the sofwares required for Embedded System Development
  • Installation of softwares
  • Learn to Setup & configure softwares to work with Microcontroller Motherboard
  • Learn Setup & test Connection b/w Microcontroller Motherboard & Computer
  • Get started by writing your first Embedded System Program for MCU
  • Learn basic programming syntax for MCU programming
  • Explore & Understand various options available in the software
  • Learn to optimise & Compile the code for selected MCU
  • Learn to use programmer to download the code from computer to Microcontroller
  • Run the Code on MCU MotherBoard

ARESP : Sensing & Actuation


ARESP : Programming


ARESP : Sensors & Interfacing Module Covered

  • Learn to interface Analog & Digital Temperatute Sensors with microcontroller
  • Learn to program microcontroller to read temperature value from the Sensor
  • After learning the concept you can:

  • Add Temperature Sensor for your projects
  • Build projects like Fire saftey systems & many more temperature sensing projects
  • Introduction to Gas Sensors
  • Learn the concept & Working of Gas Sensors
  • Learn to interface Gas Sensors with Microcontroller
  • Program to receive analog & Digital values from Gas sensors
  • After learning the concept you can:

  • Add Gas Sensors to any of your Projects which require smoke & LPG detection
  • Interface Gas Sensors with other Modules.
  • Build projects like smart homes with Gas & Smoke Detection
  • Introduction to Ultrasonic Sensors & Ultrasonic waves
  • Learn the concept & Working of Ultrasonic Sensors
  • Learn to interface Ultrasonic Sensors Sensors with Microcontroller
  • Program to send burst of ultrasonic waves
  • Program to detect reflected echoes of ultrasonic waves
  • Program to calculate distance b/w sensor & Obstacle
  • After learning the concept you can:

  • Easily add Ultrasonic Sensors to any of your Projects
  • Interface Ultrasonic Sensors with other Modules.
  • Use Ultrasonic Sensors to build Digital Distance Meter [Digital Sonar]
  • Use Ultrasonic Sensors to build , Proximity Detector, Water level controler
  • Introduction to Passive Infrared Sensors [PIR] Sensors
  • Learn the concept & Working of PIR Sensors
  • Learn to PIR Sensors with Microcontroller
  • Program to read PIR sensors
  • After learning the concept you can:

  • Easily add PIR Sensors to any of your Projects
  • Interface PIR Sensors with other Modules.
  • Build PIR based security system
  • Use PIR sensors to build Automated Energy saving lights,appliances..
  • Introduction to Accerlometer Sensors
  • Learn the concept & Working of Accerlometer Sensors
  • Learn to interface Accerlometer Sensors with Microcontroller
  • Learn to Program Accerlometer Sensors to get values to MCU
  • Learn to send Accerlometer Sensor values to Computer screen
  • After learning the concept you can:

  • Easily add Accerlometer Sensors to any of your Projects
  • Interface Accerlometer Sensors with other Modules like motors , sensors.
  • Build Gesture Controlled Robot
  • Use Accerlometer Sensors to build security devices & Gesture controlled Devices
  • Introduction to RFID Modules & Tags
  • Learn the concept & Working of RFID Modules & Cards[Tags]
  • Learn to interface RFID Modules with Microcontroller
  • Learn to Program RFID Modules to read smart cards
  • After learning the concept you can:

  • Easily add RFID & Smart cards to any of your Projects
  • Interface RFID Modules with other Modules like motors , sensors.
  • Build Smart card based security systems [Door Lock Projects]
  • Build projects like RFID based Attendance Systems for college/office..
  • Introduction to Voice Recording & Playback[VRP] Modules
  • Learn the concept & Working of VRP Modules
  • Learn to interface VRP Modules with Microcontroller
  • Learn to Program VRP Modules to Record & Playback Sounds
  • After learning the concept you can:

  • Easily add Voice Recording & Playback[VRP] Modules to any of your Projects
  • Interface VRP Modules with other sensors & Modules
  • Add Voice Prompts to your Projects like :
  • ---- voices: "Enter Password" , "Verify FingerPrint" ,"Password Accepted"
  • ---- "Temperature is critical" etc..
  • Introduction to FingerPrint[FP] Sensors & Selection of FP Sensors
  • Learn the concept & Working of FingerPrint Sensors
  • Learn to interface FingerPrint Sensor with Microcontroller
  • Learn to Program FingerPrint sensor to Capture fingerprints & store in Memory
  • Learn to Program FP sensors to Verify fingerprints from Memory
  • After learning the concept you can:

  • Easily add FingerPrint sensor to any of your Projects
  • Interface FingerPrint Sensors with other sensors & Modules
  • Build Projects like FingerPrint Based Door Lock System
  • ---- FingerPrint based Attendance System
  • ---- FingerPrint based Security System

ARESP : Motor Interfacing

  • Learn how to interface different kinds of DC Motors to Microcontroller
  • Learn to interface Motor Drivers to MCU
  • Learn Pulse Width Modulation [PWM] based Motor Control
  • Learn about Motor & power supply selection for projects
  • After learning the concept you can:

  • Easily add Different Kinds of DC motors to your projects
  • Write program to control Speed & Direction of Motors
  • Make Robots using motors & other sensors
  • Interface Motors with other sensor & wireless receivers
  • Learn concepts & working of Servo Motors
  • Learn to interface Servo Motor Drivers to MCU
  • Learn to generate PWM Pulses to control Servo Motor Angle
  • Learn to interface & control Multiple Servo Motors to MCU
  • After learning the concept you can:

  • Add Servo motors to your projects
  • Write program to control Servo Motor Angle
  • Interface Servo motors with other Sensors & devices
  • Build projects like Automated or Remote controlled Door Lock using Sevo

ARESP : Wired & Wireless Communication

  • Learn how to setup wired data communicatoion b/w MCU & Computer
  • Learn to send & receive data b/w two or more MCU
  • Learn Commuication Protocols
  • Learn to interface Infrared Remotes with Microcontroller
  • After learning the concept you can:

  • Setup & Add wired commuication b/w Computer & MCU for your projects
  • Control MCU & other periferals like Motors light etc from your Computer
  • Send Sensor data from MCU to Laptops
  • Make computer controlled Robots or Appliances
  • Learn how Infrared Remotes work[Eg Tv/AC/DVD Remotes]
  • Learn data communication between infrared devices
  • Learn infrared communication protocol to decode infrared signals from remote
  • Learn to interface Infrared Remotes with Microcontroller
  • After learning the concept you can:

  • Add Wireless Infrared remote controller to any projects
  • Use existing TV/DVD Remotes to interface with MCU
  • Control Lights, Motors ,Home appliances or any devices from TV Remote
  • Make your own Remote controlled CAR/Robot etc
  • Learn how to interface Bluetooth with Microcontroller
  • Learn to Send & Receive data b/w MCU & Bluetooth devices like Phone/Laptop
  • Learn to Program MCU to communicate with Bluetooth Modules
  • After learning the concept you can:

  • Add Wireless Bluetooth controller to any projects
  • Build Bluetooth Controlled Smart Home
  • Control Lights, Motors ,Home appliances from Laptop or Mobile using Bluetooth
  • Monitor & read Sensor data on Mobile or Laptop using Bluetooth
  • Control intensity of light by sliding slide bar on phone
  • Learn how to interface GSM Mobile Module with Microcontroller
  • Program Microcontroller to send & receive SMS from GSM module
  • Program Microcontroller to MAKE/REJECT phone calls
  • Program to create filters to accept calls/SMS only from specific numbers
  • Program to create filters to reject calls/SMS from specific numbers
  • After learning the concept you can:

  • Add Wireless GSM controller Module to any projects
  • Control Lights, Fan, Motors ,Home appliances etc by sending SMS from your phone
  • Check status of sensors & recevie sensor values by sms
  • Build Smart Security system with SMS notification when Sensor is triggered
  • Unlock/Lock doors by sending SMS or by making a Phone call

ARESP : Advanced Embedded Concepts


ARESP : Projects



Schedule

# Batch Start Date Seats Time Status
Batch 1 JAN 2018 30 9:30AM-12:30PM Registrations Open
Batch 2 JAN 2018 30 2:00PM-5:00PM Registrations Open
Batch 3 JAN 2018 30 9:30AM-12:30PM Registrations Open
Batch 4 JAN 2018 30 2:00PM-5:00PM Registrations Open

Course Duration : 10 Days[30 Hours]

Each student will get a Development kit & ARESP Certification from Digitlabz on completing the program.

Venue

New venue

DIGITLABZ Class Room, Above Sangeetha Mobile Store., A R Plaza #18/9, 100Feet Road, BTM Layout 1st Stage Opp Reliance Fresh, Bengaluru, Karnataka 560029


Get Venue Location on Phone

Please input 10-digit phone number
GPS location of the venue has been sent to your Phone.

ARESP FEES

3750 INR -- inclusive of ARESP Hardware Kit

Group Discounts

.. Fees Per Student
Join in group of 3 or more 3500 INR

Pay Online


Pay at Our Centre

Visit our centre and Pay your fees directly to our representative.

Registration Instruction

  1. Complete the Registration Form to the left to recieve the REGISTRATION ID to your mail

  2. Check your Reg ID & Name in the "Class Update" section in ARESP Page.

  3. In the "FEES" section Use the Registration ID to pay the fees to confirm your seat.

  4. Note: Fees can be paid anytime before the class starts.

  5. Check your mail for Enrollment Confirmation Email & also in "Class Update" section to verify your registartion & Confirmation of seat.

Group Registration Instruction

  1. Complete the Registration Form individually to receive REG ID to your Mail

  2. Check your Reg ID & Name in the "Class Update" section in ARESP Page.

  3. In the "FEES" section Use Group Payment section & select number of Group Members.

  4. Enter Reg ID of group members in each input.

  5. Verify Group member names & Group discount & proceed to make payment

  6. Check your mail for Enrollment Confirmation Email & also in "Class Update" section to verify your registartion & Confirmation of seat.


Please complete all the field
Success! Your Registration for ARESP has been recieved, Check your mail to confirm your registration status.

ARESP Registration

Bangalore - [Registartrions open]

BATCH 1 [35 Students]

# No. # Reg ID Name Status
1 AD001 RAVI AGARWAL
2 AD260 puneeth
3 AD002 Shubham Raj
4 AD003 Rajat
5 AD004 rajat sugandhi
6 AD005 Prajna Karanth P
7 AD006 suraj kumar
8 AD007 Rushali N M
9 AD008 Shreeya Nayak
10 AD009 Amthul Nusrath M.K
11 AD012 Alfhan
12 AD010 Sathish. K
13 AD011 Hema A S

BATCH 2 [35 Students]

# No. # Reg ID Name Status

BATCH 3 [35 Students]

# No. # Reg ID Name Status

BATCH 4 [35 Students]

# No. # Reg ID Name Status

BATCH 5 [35 Students]

# No. # Reg ID Name Status






Hyderabad - [Registartrions open]

BATCH 1

# No. # Reg ID Name Status

BATCH 2

# No. # Reg ID Name Status


Subscribe to our news letter to know the latest news & internships happening.

Complete all the fields!
Success! You have now Subscribed to Robotics Program Newsletter.
  • Get to know the latest programs & Competitions happening.

  • Receive Tutorials and projects every month.

  • Receive offers from our partners on Robotics kits & Hardware.

  • Stand a chance to attend free Robotics program.